622.                $50

Wooden “Terry-type” movement, from the Gus Lanzo collection.  Looks complete, no damage evident.  Tag says “ST Type 1.513”. 

623.                $50

Wooden “Terry-type” movement, from the Gus Lanzo collection.  Looks complete, no damage evident.  Tag says “Downs Type 8.135”.

624.                $100

Wooden Samuel Terry movement, from the Gus Lanzo collection.  Looks complete, no damage evident.  Tag says “Samuel Terry”; I believe this is an 8-day movement.

625.                $50

Wooden “Terry-type” movement, from the Gus Lanzo collection.  Looks complete, no damage evident.  Tag says “missing verge, Type 1.14”.

626.                $50

Wooden “Terry-type” movement, from the Gus Lanzo collection.  Looks complete, no damage evident.  Tag says “Riley Whiting”.

627.                $50

Wooden “Terry-type” movement, from the Gus Lanzo collection.  Looks complete, no damage evident.  Tag says “Eli Terry & Sons, check size of canon plug, slip on strike gear”.

628.                $25

A collection of new and used verges. All sizes and styles, some still in packaging from Merritt’s.  Also a container of ten “blank carbon steel verge blanks & saddles” from George Bruno.  All for one money. 

629.                $50

Wooden “groaner” movement from an Austin Chittenden clock, from the Gus Lanzo collection.  Looks complete, no damage evident. 

630.                $10

Brass weight cables.  Sizes and lengths as labeled.  All for one money. 

631.                 $50

Set of three new Seth Thomas-style brass urn finials on steel posts. 

632.                $50

Set of three new standard pillar & scroll brass urn finials on screws.  Some tarnish.

633.                $50

Set of three new standard pillar & scroll brass urn finials on steel posts. 

634.                $50

Set of three new standard pillar & scroll brass urn finials, no posts. 

635.                $50

Set of three new standard pillar & scroll brass urn finials, wooden posts. 

636.                $25

Set of three new inexpensive standard pillar & scroll brass urn finials on screws.  Very shiny.

637.                $50

Set of three new standard pillar & scroll brass urn finials on steel posts. 

638.                $25

Set of three new brass urn finials on screws.  Not quite pillar & scroll style, badly tarnished.

639.                $50

Set of three modern miniature brass urn finials on screws.  Each is 2.5-inches tall.

640.               CL-38.            $50

Two period Seth Thomas hollow brass urn finials.  Note that they do not match. 

641.                CL-39.            $15

Two standard modern brass urn finials on screws. 

642.                $10

Set of three wooden urn finials, no posts, 3.5 inches tall.

643.                $15

A pair of period diamond hands for early clocks.  The minute hand is 5.5 inches long; the hour hand is 4.25 inches long.  Note that the hour hand lacks a mounting ring.

644.               $15

A pair of period diamond hands for early clocks.  The minute hand is 5.5 inches long; the hour hand is 4 inches long.  For mounting on a round shaft.

645.                $15

A pair of period diamond hands for early clocks.  The minute hand is 5.5 inches long; the hour hand is 3.5 inches long.  For mounting on a round shaft.

646.               $25

Two brass springs, look new. 

647.                $50

Seth Thomas Clock Co. No. 50 double-wind 15-day, time-only brass movement.  The number ‘50’ is stamped on the lower right and the ST logo is in the center.  The left spring is broken.  The brass movement is mounted on a cast iron bracket.  Untested and unused, some rust/corrosion. This also corresponds to the more commonly used No. 86 movement and could also be a 30-day. 

648.               $25

Seth Thomas Clock Co. “Chime Clock No. 7”, ca. 1914.  The adamantine case is 13.5 inches tall with a good finish and a working movement but no chime movement. The dial glass is convex, the silvered dial shows modest wear, the hands are appropriate.  The clock will run but there is no pendulum bob. 

649.               $25

Reproduction banjo movement.  All complete, some reassembly required.  No pendulum or weight.  Untested.

650.                $25

Seth Thomas Type 61 movement. I believe this is a reissued movement for the 1976 Regulator No. 6.  On a cast iron mounting bracket, time-only, weight-driven, no pendulum, no weight.  Untested.

651.                 $50

Reproduction movement for a Seth Thomas No. 3 Regulator.  On a cast iron mounting base with suspension spring.  Time-only, weight-driven.  Unused. Made by Nayaks TTC, India.  Untested.

652.                $10

Seth Thomas Type 89C movement. Front-mount, 8-day time-and-strike spring-driven.  Untested.

653.                $10

Seth Thomas Type 89AL movement. Front-mount, 8-day time-and-strike spring-driven, with pendulum rod.  Untested.

654.                $10

Seth Thomas 8-day time-and-strike spring-driven movement, with verge and crutch.  Untested.

655.                $25

Sonora Chime 4-bell movement. Untested.

656.                $25

Three Seth Thomas (unmarked) 8-day, weight-driven movements, time-only.  The smallest on the left is missing the escape wheel and verge.  All untested.

657.                $25

Japy Freres pendule de Paris 8-day time-and-strike movement with porcelain dial, hands, beveled glass in bezel, pendulum and bell and strike hammer.  Untested. 

658.                $25

Oak dial boards and dials (time and calendar) for a Seth Thomas Office Calendar No. 13.  Now all you need is the case and movements.  See #157 for an example.  No mounting bezel for the calendar dial; one dial board has no dial.

659.                $25

Elmer Stennes metal dial. History unknown, on aluminum, 7.5 inches in diameter, 6.75-inch chapter ring.    

660.               $10

Seth Thomas (replica) 14-inch dial. Full diameter of 15.5 inches on painted aluminum (14-inch diameter time-track).  Winds at the number 2, with seconds bit opening. Fits a Seth Thomas No. 62 movement. 

661.                $5

Seth Thomas 14-inch dial for a 30-day clock.  Some touched-up chips at the ‘2’.  Fits a 14-inch Gallery clock, including #204. 

662.                $25

Three 13-inch dials for Seth Thomas clocks.  These would fit a Regulator No. 3 or No. 17.  All three for one money.

663.                $25

Six 12-inch dials for Seth Thomas clocks.  These dials have an 11-inch chapter ring; note that one is a calendar dial, mounted in a tarnished brass bezel, and one is in a nickel bezel.  Some repainted, some not; some new, some not. These should fit ST Regulator No. 2 clocks.  All for one money.

664.               $5

An 11-inch dial for a Seth Thomas clock. The chapter ring is 10 inches; it has been repainted/touched up. 

665.                $10

Two 12-inch dials for an E. Howard clock.  The chapter ring is 11 inches.  One or both may have been repainted.  Both for one money.

666.               $5

A 12-inch dial for a Self Winding clock. The chapter ring is 11 inches. 

667.                $5

Three miscellaneous dials. A square contoured dial for a triple-decker or OG, 8.25 inches square, winding holes 3.25 inches apart, 2 inches from center point. A 5-inch paper dial on a brass dial pan, winding holes 3.125 inches apart, 2.125 inches from center point.  An 8-inch iron dial, repainted, with a 7-inch chapter ring, winding hole at the number ‘2’, likely for a banjo clock or equivalent.  All three for one money. 

668.               $25

Eli Terry wooden dial board.  Significant losses and soiling but note the two center ring floral decorations typical of Eli Terry’s early dials.  At 12.5 inches wide and 11.25 inches tall.