Antique American Clocks January 2020
42. $1500
Charles Jacques Hall Clock with tubular bells, 1905. Jacques was the inventor, marketing
his clocks through several New York importers/retailers after he sold his business to Harris and Harrington in 1894. Here he
was working with Bawo and Dotter from 1895 to about 1915; Bawo & Dotter, Limited are listed as the Patentees and Makers, N.Y.
on the dial of this clock. This clock is shown on page 51 of Ly’s book, “Longcase Clocks and Standing Regulators” under Borgfeldt
& Co. (another retailer Jacques worked with after B&D). With its feet and spire finial this clock is 8 ft
5 inches tall, but without the feet and center spire it will fit in a room with an 8 ft ceiling with room to spare. It looks
just fine without feet and the finial. The case is solid mahogany with a deep rich finish, with thick beveled glasses on the
trunk door and sides. There are full fluted columns on either side of the bonnet and trunk, and a swan-neck pediment on top. The back is open, covered with fabric. The metal dial is outstanding, with a moon arch dial, hand-pierced brass detail, an engraved
hour circle, and raised gilt beveled numerals. It is as clean as a whistle and has not been resilvered. In the upper left
is a “chime/silent” switch, and on the right a dial to select the chime pattern (Whittington, Trinity, Westminster). The clock
strikes on nine 1.5-inch tubular bells; it also counts the hours on four bells. The clock is running and striking, and looking
impressive; it will do the same in your home, but will likely need adjustment by a knowledgeable clock repairman after transport and
reassembly for best sound. You can listen to the chime sequence here. Prices for 9-tube clocks vary considerably, but
I would expect between $1500-$3000.
Did you know that we deliver? Ask Alexa or Google how far it is to Lexington and multiply
that distance by 60˘/mile; add a $100 surcharge for each additional 300 mi.